Steel Sling Questions
Do I need tags on my wire rope slings?
Yes. Effective July 8, 2011, OSHA requires legible identification markings on all wire rope slings. View Details
Is a new wire rope sling with a “high strand” in the eye acceptable?
While the Flemish Splice method tends to result in varying degrees of strand looping (high strands) in the sling eye, this is not cause for removal from service as sling capacity and durability are not affected. However, high strands in the sling body, do affect sling strength and indicate that the sling is damaged and should be removed from service.
Will a chain sling last longer than a wire rope sling?
When used under the same conditions, chain slings can be expected to last longer than wire rope slings.
What grade of chain is required for overhead lifting?
The National Association of Chain Manufacturers allows only alloy steel chain to be used for overhead lifting. Although not specified by OSHA, they will enforce the NACM requirement.
What is the difference between grade 80 and grade 100 chain?
Grade 100 chain slings are approximately 25% stronger than grade 80 chain slings of the same diameter. The chain is harder, resulting in greater abrasion resistance and, therefore, longer life.
Can you re-tag chain slings in the field without sending them in to be proof tested?
No. The sling must be sent back to Lift-All for inspection and proof testing before it can be retagged.
Is there an advantage to a welded chain sling assembly over a mechanical assembly?
Welded chain slings are tamper proof, assuring that you have an assembly that has not been compromised with an incompatible component.